Workersbee CCS1 400A 1000V naturally cooled DC Charging Connector

The Workersbee CCS1 400A DC charging connector is designed for DC charging systems that require a naturally cooled high-current connector. It follows the SAE J1772 interface standard and is intended for electric vehicles using the CCS1 charging interface.

The connector is rated at 400A and 1000V DC. Key parameters include insulation resistance above 500MΩ, withstand voltage of 3000V, insertion and withdrawal force below 100N, and a mechanical life above 20,000 no-load cycles. The flammability rating is UL94 V-0.

For outdoor and commercial charging environments, the connector is specified to IP55 and supports an operating ambient temperature range from -40℃ to 50℃. The product also supports temperature monitoring, which must be enabled in use according to the specification.

The 400A version supports project-based customization of cable length, stripping length, lug type, and sensor type. Available sensor options include PT1000 and NTC, depending on charger-side integration requirements.

400A / 1000V DC rating

Designed for CCS1 DC charging systems with a rated current of 400A and rated voltage of 1000V DC.

Naturally cooled cable structure

Suitable for charger designs that use a naturally cooled high-current connector architecture.

Temperature monitoring support

Temperature detection must be enabled during operation, and PT1000 or NTC options are available for different charger integration needs.

Outdoor protection

Specified to IP55 for charging applications that require outdoor installation protection.

Mechanical and material performance

Insertion and withdrawal force is below 100N, mechanical life exceeds 20,000 no-load cycles, and the material flammability rating is UL94 V-0.

Project-based customization

Supports customization of cable length, stripping length, lug type, and sensor type.